Electrical is continued from previous page.
Order by phone at
Battery Switches & Voltage-Controlled Relays
Sensitive Battery Switches
Motorized switches automatically sense the voltage
and provide optimal, efficient charging of up to
two independent battery banks, allowing them to
be combined or isolated based on the presence
of a charging source; plus, remote activation of
emergency parallel connection of the battery banks.
All units are ignition protected, provide On/Off
operation and may be recessed or surface mounted.
The 720-MDVSO (model 14152268), features digital circuitry and optical sensor
positioning that automatically senses 12V or 24V input. All models can be
remotely controlled using the wireless remote control (Model 14152276), which
provides remote activation of the circuits from up to 250 feet away.
Voltage sensing relay with manual overide
Tinned copper conductors, stainless steel nuts
Meets UL 1107 standards
Twin Engine/Two Bank
Battery Switch Cluster
For twin engines and two banks of
batteries. The house loads can be
switched between port and starboard
battery. The selector switch can also
be used to parallel the batteries when
in both positions.
Two 701 On/Off and One
200A (Selector) 275A (On/Off)
1250A Cranking, 455A Intermittent (On/Off), 1000A Cranking,
300A Intermittent (Selector)
8 3/16"L x 2 11/16"W x 3/4"H
3/8" (On/Off) 5/16" (Selector); Tin plated copper studs and nuts
BEP# 715-S ShWt .3
Motorized Battery Switches
High-current, remotely activated battery switches
allow convenient operation with the remote
switch within easy reach of the user, and the
battery switch positioned where cable runs can
be minimized. Reduced cable runs allow smaller
section cable to be used, resulting in significant
reductions in cable cost, plus weight savings. As
well as remote, motorized operation, these switches
can be manually overridden. From the "Manual
Off" position, the switch knob can also be removed,
providing security, particularly during servicing. The
units are ignition protected, provide On/Off switching
operation, and may be recessed or surface mounted.
High temperature fiber-reinforced plastic
Tinned copper conductors/studs, stainless steel nuts
UL 1107 ignition protection standards
SureStart Compact Low
Voltage Disconnect Switch
No more dead batteries! Electronically senses
battery voltage and conserves starting power.
Automatically disconnects and reconnects loads
based on battery condition; no operator action is
required to protect the batteries. Prolongs battery
life by preventing damage due to excessive
discharge. Eliminates the need for both separate
timer or voltage sensing delay relay devices and high current relay or solenoid,
and simplifies wiring and installation. Small size and lightweight, waterproof
and dustproof (IP67) design means easier and more discrete mounting. When
battery voltage falls below programmed voltage setting for two minutes, non-
critical loads are automatically disconnected. Sealed connector makes it ideal
for harsh environments. Programmable timer feature automatically disconnects
loads after key off, regardless of battery condition. 4 1/2"W x 4 1/4"L x 3 1/8"H.
COLE# 48513-01 ShWt 1.1
EZ-Mount Pro Installer Switches
As easy as 1, 2, 3, these revolutionary battery switches allow
you to wire from the front. Simply remove the back, wire, and
then snap the actuator and cover back in place. Never has
installation been so easy. High quality, durable switches accept
large cables with multiple lugs, and feature intuitive, ergonomic
switch positioning and clear graphics to indicate switch position.
The EZ-Mount switches have a compact, industry standard footprint and the
shared interconnection height to "cluster" directly with other Pro Installer products,
saving valuable onboard space. They meet rigorous global standards and are
constructed for longevity in the marine environment. Innovative, patent-pending,
Dual Bank Control switch is three switches in one: House, Start, and Emergency
Parallel. In case of emergency the engine battery can be isolated, while the house
remains on, allowing use of lights or the ability to make an emergency radio call.
This is also useful if the engines are being serviced.
Intermittent Amps (5 min.):
10mm (3/8") Tinned copper studs, stainless steel nuts and
3 7/8"W x 3 7/8"H x 3 5/8"D
Remote Key Switch:
remote operation of the 701-MD
and 720-MDO motorized battery
switch series. It can be mounted
stand-alone or as a component of
the Contour Connect series.
Remote Emergency Parallel Switch:
operation of 701-MDVS, 80-701-0018-00, 720-MDVS/
MDVSO, and 720-MDO-EP motorized battery switches.
This momentary switch is used to activate the built-in 10
minute emergency parallel function of the BEP Marine battery switches, and can
be placed within easy reach of the operator. The remote switch also features an
LED battery switch status indicator. Both switches measure 2 11/16" x 2 11/16"
and work with 12V or 24V systems.
Volts Cut in, Cutout Volts
BEP # ShWt
12V 13.7V, 12.2-13V 275A 1250A
24V 27.4V, 24.4-26V 275A 1250A
12/24V 13.3V, 12.7V 500A 2500A
Remote System Wireless Kit
BEP # ShWt
2 11/16"W x
2 11/16"L x 4"H
700A 2500A 4"W x 4"L x 4 3/8"H
Remote Key Switch
Remote Emergency Parallel Switch
MARCO # ShWt
Off/On, Single Pole
Off/On, Double Pole
Dual Bank Control Switch
Off/On, Single Pole
Off/On, Double Pole
Previous Page - Next Page
-2015-2016 Master Catalog
Choose a different catalog.