Electrical is continued from previous page.
Order by phone at
Push-Pull & Pushbutton Switches
Compact 10A pushbutton
switches for horn, starter, and
other momentary applications.
Two male 1/4" blade terminals.
Rubber Button Covers
Protect switch mechanism from water and
dirt with snap-on covers. Embossed with PUSH.
Switch in Boot SPST
Can be used in momentary
applications where a small switch
is required such as doors and
hatches. Black rubber boot covers and protects the
face of the switch. Dust-resistant. SPST normally
closed-Off with plunger depressed, spring return
to On. 4A @ 12V DC lamp load. Two brass blade
terminals, 2mm x 5mm.
COLE# 9006-BP ShWt .1
Normally off, with a variety of connections when
pulled. Heavy-duty, noncorrosive construction with
moisture-repellent insulators. Brass case, stem,
terminals and mounting hardware. All knobs are
screw-on type. Stems: 3/8"dia. x 1 1/4"L. 6-36V DC.
Rated for 10A at 12V DC.
A. M-482 Off/On Switch
Gasket-sealed case protects against dirt and
moisture. Chrome-plated 7/8"dia. brass knob.
Mounts in panels to 3/4" thick.
COLE# M-482-BP ShWt .2
B. M-628 Off/On Switch
Same as above but without gasket seal.
COLE# M-628-BP ShWt .1
C. M-476 3-Position Switch
Off/On #1/On #2
COLE# M-476-BP ShWt .3
D. M-527 2 Circuit SPST Switch
Heavy-duty 10A Off/On switch controls two circuits.
Brass case, 3/8" mounting shaft. For panels to 1" thick.
COLE# M-527-BP ShWt .2
E. M-532 3-Position Switch
Three positions: Off/On #1 & #2/On #1 & #3. Great
for multiple lighting circuits such as cabin, anchor
and running lights. Mounts in panels to 1" thick.
COLE# M-532-BP ShWt .3
F. M-531 3-Position Switch
Three positions: Off/On #1/On #2. Permits operation
of two circuits independently with one switch.
Mounts in panels to 1" thick.
COLE# M-531-BP ShWt .3
G. M-606 2-Position Off/On Switch
Plasticized body helps seal out moisture and dirt.
Two 18-gauge wire leads 12" long. Mounts in panels
to 5/8" thick.
COLE# M-606-BP ShWt .3
M-490 Extra-Heavy-Duty Button
Corrosion-resistant brass with silver contacts.
Molded plastic insulator with protective barrier
between terminals. Fits panels up to 1" thick. Rated
for up to 35A @ 12V DC.
COLE# M-490-BP ShWt .3
M-612 Recessed Button
Like M-490, but with recessed button and flanged
face nut to prevent accidental activation. Rated for
up to 35A @ 12V DC.
COLE# M-612-BP ShWt .7
M-485 Moisture Sealed
Gasket-sealed brass case protects against moisture
and dirt. Fits panels up to 3/4" thick. Rated for up to
10A @ 12V DC.
COLE# M-485-BP ShWt .3
M-492 Standard Switch
Similar to M-490 but with top-mounted terminals. Fits
panels up to 1" thick. Rated for up to 10A @ 12V DC.
COLE# M-492-BP ShWt .2
M-626 Extra-Heavy-Duty Button
Same as M-490 but with black moisture-repellent
cover which snaps over face nut. Fits panels up to
1" thick. Rated for up to 35A @ 12V DC.
COLE# M-626-BP ShWt .3
Plasticized body helps seal
against moisture and dirt.
Includes two 18-gauge wire leads 12"L. Fits panel
up to 1/2" thick. Rated for up to 10A @ 12V DC.
COLE# M-608-BP ShWt .3
Fits M-490, M-492, M-485 pushbutton switches.
COLE# 83280-03-BP ShWt .1
Previous Page - Next Page
-2015-2016 Master Catalog
Choose a different catalog.