Engine is continued from previous page.
This is an Annual Catalog. Please check
for current pricing.
Fuel Tank Vents & Fittings
P-Trap Fuel Surge Protector
One combined product eliminates the need
to install both a fuel line vent and a surge
protector. Inertia of surging fuel drives the
surge ball against upper seat, closing the
large vent opening and limiting passage to
smaller openings in order to reduce fuel flow
and minimize spillage. Operates in any orientation within 45 of vertical. Baffles
resist water intrusion during normal sea conditions and washdown. Constructed
of glass-filled polypropylene to withstand oil, gas or alcohol-blended fuels.
Meets ABYC standards. Fits 5/8" ID hose. Min. 1/4" hull thickness. Two spacers
included to allow hull thickness up to 1". Requires 1 3/8" installation hole.
ATTWO# 1684-6 ShWt .2
90 P-Trap Fuel Tank Vent
This baffled vent helps prevent water from entering
the fuel tank, yet allows air to vent freely during
normal sea conditions and washdowns. Eliminates
the need for anti-siphon loop in the vent hose.
Meets ABYC standards. Fits 5/8" ID hose, Min. 1/4"
hull thickness, requires 3/4" installation hole. Two
spacers included to allow hull thickness up to 1".
ATTWO# 1674-6 ShWt .5
Chrome-plated brass. Round head and non-removable
screen. Fits 5/8" ID hose.
WMFUE# 4496CH ShWt .2
Thru-Hull 90 Vent
Chrome-plated brass vents with monel screens. For 5/8"
ID vent hose.
WMFUE# 88WM975-6 ShWt .9
Chrome-plated pressure cast bronze with removable
monel 30 mesh wire screening. USCG-approved.
Model 256479 has 90 angle.
PERKO # ShWt
Chrome-plated zinc with black plastic splash guard
and removable 30 mesh monel wire screen flame
arrestor. Fits 5/8" ID hose. Max. hull thickness: 3/4".
PERKO# 0506DP4CHR ShWt .2
In-Hose Fuel Check Valve
Designed for use with plastic or metal tanks, the
In-Hose Fuel Check Valve fits inside the fuel fill
hose itself. Mounts inside standard 1 1/2" fill pipes
near the connection to the fuel tank. Solves the
need to retool existing doghouse on plastic tanks.
Replaces in-line check valves, eliminating four
hose clamps and two leak points. Allows for full 18gpm flow rate.
PERKO# 0635DP0 ShWt .1
Green Marine Products
This unique and easy-to-install device makes a
whistling sound that stops when your tank is full,
preventing spills into the marine ecosystem. While
the tank is being filled, it produces a "whistling"
sound loud enough to be heard from any point in
the boat, over wind and background noises. As the
tank approaches full, the sound turns to a "warble,"
and when completely full, it immediately stops.
3 3/4"L (overall) 2"L (installed) x 2"W. Installed in vent
line near tank.
OCEAS# 204 ShWt .1
Stainless Steel Hose Clamp Kit
Worm-style clamps provide secure, even pressure
on fuel lines. Fully adjustable to fit 1/4" - 5/16" I.D.
WMFUE# 88WM203-6 ShWt .1
Fuel Vent Line Surge Protector
Inertia of surging fuel drives the surge ball against upper seat,
closing the large vent opening and limiting passage to smaller
openings in order to reduce fuel flow and minimize spillage.
Solid, glass-filled polypropylene construction and simple surge-
ball design. Fits 5/8" ventilation hose. Clamps included.
ATTWO# 1675-6 ShWt .2
Push-In Thru-Hull Vent
Marelon fuel-tank vent simply pushes into a
3/4" installation hole and automatically locks in
place. Accepts 5/8" ID hose. Corrosion-proof. For
FORSP# 907029 ShWt .1
P-Trap Tank Vent
Black plastic vent with internal baffles and traps
prevents water from entering fuel tank and
allows more direct routing of the hose. Requires
1 1/2" height clearance for anti-siphon feature. Fits
5/8" ID hose. Meets ABYC standards.
ATTWO# 1670-3 ShWt 1
Previous Page - Next Page
-2015-2016 Master Catalog
Choose a different catalog.